- Usb optical mouse driver rebddragon how to#
- Usb optical mouse driver rebddragon manuals#
- Usb optical mouse driver rebddragon windows#
And you can use the mouse while it is under recharging. The battery can be recharged for more than 300 cycles times. It may take about three hours for the mouse to be fully recharged. While the battery is under recharging, the scroll wheel lights up in red and then turns to green when the battery is fully recharged. Take out the USB A to USB C cable and connect the mouse with a computer. When the battery is low, please recharge the battery in time. The effect changes in the following sequence: Mixing color flowing, purple light, Seven color cycling while breathing, Mixing color tracing, Neon light, Mixing color light on, Flashing in purple and green, Starry night twinkling, Seven colors waving, Off. Press the light button repeatedly to change the backlight.
Usb optical mouse driver rebddragon how to#
The report rate changes from 125Hz to 250Hz, 500Hz, and 1000Hz.The scroll wheel light changes color for each accordingly.Ĥ How to Select the Backlight of the mouse Press the report rate button on the bottom of the mouse to change the report rate.
Press the two buttons to change dpi and the scroll wheel light will change color accordingly.ģ How to Switch the Report Rate of the mouse Recharge the mouse when the battery is low.ĭPI The top two buttons near to the scroll wheel are set to DPI+ / DPI – as default. The scroll wheel light will flash when the battery is low.If you slide the bottom switch to ECO, only the DPI indicator can be active. The scroll wheel LED and the decoration LED will light on when the bottom switch was slid to ON. The mouse will be ready for use when the configuration is finished.The computer will recognize and configure the keyboard automatically.Slide the power switch on the bottom of the mouse to ON or ECO.Take out the nano USB receiver in the package and plug it into any available USB port on your computer.Turn the bottom switch to ON to light up the mouse decoration light, otherwise turn it off.The scroll wheel LED lights are on red to show that the mouse is being recharged now. The computer will recognize and configure the mouse automatically.Take out the USB A to USB C cable in the package and connect the mouse with your computer.Power Switch: ON (Power On with LED ON) / OFF(Power OFF) / ECO(Power On without LED).ġ How to Connect the Mouse with a Computer.Report rate switch: 125Hz/250Hz/500Hz/1000Hz four-level switching.Rapid-fire button (one click equals three left mouse button clicks).Light mode toggle key: The mouse switches between the 9 lighting modes for each click.
Usb optical mouse driver rebddragon windows#
Windows XPNista/Win7/Win8/Win10 Button Description Consumable parts (such as footpads) and spare parts replacement are not Included In our warranty.Other damages, such as disassembly, hard Impacts, submersion Into the water, plugging into improper current or voltage, and damage caused by natural disasters such as fire, flood, or earthquake are not included. Within the guarantee period, the repair is guaranteed for failure due to electrical circuit problems.To protect your rights and for better customer service, we ask that you note our warranty rules.
Thank you for choosing our ‘ to the product.
Usb optical mouse driver rebddragon manuals#
7.1 Related Manuals / Resources Operating Instructions
0 kommentar(er)
